Energy, Data Centres & Utilities Infrastructure
Infrastructure solutions built around your project
From large-radius electrical duct bends to PE fittings and custom fabrication, Solo Plastics supports New Zealand energy, data centre and utility projects with locally fabricated solutions, technical capability and practical project support.
We work alongside merchants, contractors and infrastructure teams to help solve both standard and project-specific requirements.
- Supporting New Zealand Infrastructure
- Why PVC and PE for Infrastructure Projects?
- Why PVC?
- Why PE?
- Data Centre Infrastructure
- Water and Civil Infrastructure
- Renewable Energy Infrastructure
- Electrical Duct Bends
- PE and Water Infrastructure Components
- Custom Fabrication
- Supporting Our Merchant Partners
- Why Solo?
- Technical Note
Got an unusual enquiry?
Send it through.
Whether your customer needs a particular bend radius, a fabricated PE component or something that is difficult to find, our team can help work through the options.
- Phone:Â 0800 765 675
- Email:Â [email protected]
- Contact Form
Supporting New Zealand Infrastructure
Modern infrastructure projects rely on complex networks of power, communications, water and other essential services.
Solo Plastics brings together PVC and PE products, local fabrication and more than 35 years of plastics expertise to support infrastructure across New Zealand.
Supporting projects across:
- Data centres
- Renewable energy
- Solar and wind farms
- Substations
- Electrical infrastructure
- Water infrastructure
- Civil and utility projects
From standard fittings to custom-fabricated components, we can help find a practical solution for the job.

Why PVC and PE for Infrastructure Projects?
Proven materials for modern infrastructure
PVC and polyethylene (PE) are widely used across electrical, water and civil infrastructure because they combine durability, corrosion resistance and practical installation characteristics.
Each material has different strengths and applications. Together, they allow Solo to support multiple parts of an infrastructure project — from underground electrical routes to water and civil services.
Why PVC?
PVC is widely used for underground electrical infrastructure where cable protection, durability and practical installation are important.
Corrosion resistant
PVC does not rust like metallic materials, making it well suited to buried and exposed infrastructure environments.
Smooth internal surface
A smooth internal finish helps reduce friction when pulling electrical and communications cables through ducting and bends.
Lightweight
Its relatively low weight can make PVC components easier to transport, handle and position onsite.
Built for underground services
PVC electrical duct provides a protected route for underground power and communications cabling.
Fabrication flexibility
PVC can be fabricated into different angles and radii, making it possible to accommodate complex service routes and project-specific requirements.
For large infrastructure projects, Solo can fabricate electrical bends to suit the required radius, including bends with radii of up to 10 metres.
Why PE?
PE is widely used across water, wastewater and civil infrastructure due to its combination of flexibility, corrosion resistance and jointing capability.
Durable and corrosion resistant
PE does not rust or require the corrosion protection associated with metallic pipe systems.
Flexible
PE can accommodate changes in alignment and ground conditions, making it well suited to a range of buried infrastructure applications.
Lightweight
Its relatively low weight can simplify transport, handling and installation.
Fusion jointing
PE systems can be joined using techniques including butt fusion and electrofusion, creating continuous pipeline systems when designed and installed to the appropriate specification.
Good flow characteristics
The smooth internal surface of PE supports efficient flow through water and pipeline systems.
Custom fabrication
PE can be welded, formed and fabricated into project-specific components for applications where standard fittings are not suitable.
Data Centre Infrastructure
Supporting the infrastructure behind data
A data centre depends on much more than what sits inside the building.
Large facilities require significant electrical, communications and civil infrastructure to bring essential services into the site and distribute them between buildings, substations and other infrastructure.
Solo can support these projects with electrical duct bends, PVC solutions, PE fittings and project-specific fabrication.
Electrical & Communications Infrastructure
Solo’s PVC electrical duct bends provide solutions for complex underground cable routes, including applications where standard bends do not meet the required radius or configuration.
Solutions include:
- Large-radius electrical duct bends
- Custom bend configurations
- Underground electrical ducting components
- Power distribution cable routes
- Communications and fibre infrastructure routes
- Connections between substations and facilities
- Project-specific PVC fabrication
Large-radius bends help accommodate changes in cable direction while providing the smooth internal finish required for cable pulling.
Water and Civil Infrastructure
Data centre developments can also require extensive supporting water and civil infrastructure.
Solo’s PE and PVC capabilities can support associated infrastructure including:
- Water supply infrastructure
- Stormwater
- Drainage
- Underground utility services
- Site-wide civil infrastructure
- Custom PE components
Product and material selection will depend on the specific application and project requirements.
Renewable Energy Infrastructure
Supporting the infrastructure behind renewable generation
Solar farms, wind farms and other renewable energy developments require extensive underground electrical and utility networks.
Solo’s electrical duct bends and fabrication capability can help contractors manage complex cable routes across large infrastructure sites.
Solutions for renewable energy projects:
- Large-radius electrical duct bends
- Custom-radius bends
- PVC electrical components
- Underground cable infrastructure
- PE fittings
- Water and civil infrastructure components
- Project-specific fabrication
When the required angle or radius is outside the standard range, Solo can fabricate a solution around the project requirements.
Electrical Duct Bends
Made to get around the difficult bits
Not every cable route can be solved with a standard bend.
Solo Plastics manufactures electrical duct bends for infrastructure projects where specific angles, diameters or radii are required.
Our fabrication capability extends from standard configurations through to large-radius bends, with our largest fabricated radius reaching 10 metres.
Ideal for:
- Data centres
- Substations
- Solar and wind farms
- Commercial and industrial electrical installations
- Civil and utility projects
- Rail and transport corridor cabling
Custom to the project
Bends can be fabricated around specific radius and configuration requirements
Smooth internal finish
Designed to support easier cable pulling through changes in direction
Large-radius capability
Solutions for infrastructure routes where standard bend radii are not suitable
Suitable for underground and outdoor installation
Designed for demanding electrical infrastructure environments
Locally fabricated
Manufactured in New Zealand with direct access to the Solo team for project support
Reduced onsite fabrication
Prefabricated components can help reduce the need for modifications onsite
PE and Water Infrastructure Components
Supporting the wider project
Energy, data centre and utility projects often require water and civil infrastructure alongside their electrical systems.
Solo supplies and fabricates PE components for watermain, wastewater, stormwater and wider civil infrastructure applications.
Our PE range includes
Bends
Moulded, formed and fabricated options for a range of infrastructure applications.
Tees & Reducing Tees
Moulded and fabricated components across multiple sizes.
Reducers
Solutions for transitions between pipe diameters.
Stub Flanges & Slim Flanges
PE flange solutions for pipeline and equipment connections.
Bends
Moulded, formed and fabricated options for a range of infrastructure applications.
Tees & Reducing Tees
Moulded and fabricated components across multiple sizes.
Reducers
Solutions for transitions between pipe diameters.
Stub Flanges & Slim Flanges
PE flange solutions for pipeline and equipment connections.
Custom Fabrication
When standard isn’t the solution
Infrastructure projects do not always fit neatly into an off-the-shelf product range.
Solo specialises in PVC and PE fabrication, giving contractors and merchants access to project-specific components when a standard fitting does not meet the requirement.
Our fabrication capability includes
- PVC fabrication
- PE fabrication and machining
- Large-diameter PE fabrication
- Custom electrical bends
- Custom fittings and components
- Butt fusion welding
- Electrofusion welding
- Extrusion welding
- Onsite modifications and installation support
From a different bend radius to a completely bespoke component, talk to us about what the project needs.
Supporting Our Merchant Partners
Helping you support your customers
Solo products are supplied through established merchant networks across New Zealand.
We work alongside merchant teams to help identify the right products, respond to technical enquiries and find solutions when a customer needs something outside the standard range.
We can help with
- Product identification and selection
- Electrical bend requirements
- PE and watermain components
- Custom and non-standard products
- Technical product information
- Product documentation
- Project-specific fabrication enquiries
- Catalogue and technical resources
Why Solo?
Local capability for New Zealand infrastructure
Local fabrication
PVC and PE fabrication capability from our New Zealand operation.
Infrastructure experience
More than 35 years of experience designing and fabricating plastic piping components and solutions.
Custom capability
Project-specific fabrication when an off-the-shelf component does not meet the requirement.
PVC & PE expertise
Capability across electrical, water and civil infrastructure applications.
Fusion welding
Butt fusion, electrofusion and extrusion welding capability for PE systems.
Merchant support
Practical product and project support for merchant teams and their customers.
Technical Note
Product suitability, material selection and installation requirements depend on the individual application and project specification. Relevant standards and engineering requirements should be considered when specifying products for an infrastructure project.
Your Next Project Starts Here
Working on a data centre, renewable energy development, substation, water infrastructure project or another large-scale utility project?
Whether you need a large-radius electrical bend, PE component or something fabricated specifically for the job, talk to Solo.
0800 765 675